Metal Stud Roof Purlin Sandwich Panel Floor

• Customization: Available
• Tile Type: Colored Steel
• Certification: CE, ISO, BV
• Customized: Customized
• Usage: Roof, Wall
• Transmission Method: Pneumatic
• Delivery: 60days
• Voltage: 308V 50Hz 3phases
• Warranty: 1 Year
• Weight: 17.5 Tons
• After Sales Service: Engineers Available to Service Oversea
• Transport Package: by Sea
• Specification: 4500mmx2500mmx2600mm
• Trademark: KXD
• Origin: China
• HS Code: 84552210
• Production Capacity: 200 Set Per Year

Product Description

 
 
Sandwich panel production line is especially designed for producing insulation composite board. With stepless speed regulation system, it is able to produce corrugated composite panel efficiently at one time. Sandwich panel roll forming machine has been an indispensable device in fabricating roof panels and wall panels in plants and warehouses, among other buildings.


Features
1. The motor power of the sandwich panel roll forming line is 4kw, and the production speed reaches 6m/min. With the stepless speed regulation system, the efficiency of the roll forming line is optional within 0-6m/min.
2. When producing EPS sandwich panel, the speed is generally controlled at 2-6 m/min. It will be slightly lower for making rock wool board (depends on actual needs)
3. The composite panel production line is equipped with K-9 glue metering pump, featuring low rotating speed and high accuracy. The glue is fed at a rate of 0.1-2.0 kg/min. It is controlled by frequency converter.
4. The thickness of the composite panel the roll forming unit can produce is varied from 50mm to 250mm. By adjusting the upper and lower rack, and the distance between the cutter holder and the material feeding rack, we can get sandwich boards with different thickness and specifications.
5. Total installed capacity: 34KW; total weight (including accessories): 17.5t.
6. Dimension of the panel roll forming machine: 12500 (16000 for rock wool boards) X2200X2800; the roll former for 5 type EPS sandwich panel adopts 23 rubber shafts and 160X80 square tubes with thickness of 6mm; the roll former for 7 type composite rock wool panel employs 45 rubber shafts, and upper and lower independent glue supply. It is equipped with 1.7m rock wool panel conveyor belt, with the diameter of the drive shaft to be 50mm; length of the machine frame is up to 9m; the roll former is welded with 180X80 square tubes which thickness is 8mm.
 
 

 
Requirements for Factories:
The factories where our EPS sandwich panel production line are applied can be either flatroof or sloped-roof type. The height of the cornice should be larger than 5m, and the effective width should be at least 45m. The floor of the factory should be flat and concrete. For foundation of the roll forming line, it is required to be to be 380V, and the total installed power is 34kw. It is necessary for the factory to be equipped with 0.4-0.6MPa compressed air supply and illumination devices. The roll forming machine shares the same power supply with the auxiliary devices. The fluctuation of voltage should be no more than 10%, or it may lead to an abnormal running of the system.
 
The stroke is no less than 29m, the load for a lifting process is larger than 5000kg, and the lifting height is no less than 3.9m. For daily production and maintenance, about 6-10 people are needed, with 3-4 operators for some core processes included.

 

Accessories List of 5 Type Composite Roof And Wall Cladding Panel Machine
adjust spanner	3pieces
filter element	2pieces
big glue head	2pieces
bulkhead glue	4pieces
glue joint	4pieces
steel sheet chuck	2pieces
screw	depends
machine tool pad iron	16sets
brake plate	3 sets
M16×140 bolt	16pieces
axes	1piece
M16 nut	16pieces
steel wire tube	1piece
heating tube	8pieces
heating tube ceramics end	16sets
glue pipe	6pieces
M8×35 inner hexagon screws	30pieces
φ10×80 taper pin	1piece
delivery rack	1set
mainframe	1set
cutting rack	1set
tile plate wheel	1set
overtravel-limit switch	2pieces
pneumatic elements	1 set
glue channel(4long 2short)	6pieces
large tray	1piece
ladder	1piece
M16×40 outer hexagon screws	8pieces
Color clip	4 sets
discharge rack	1piece
05-06 frame	1set
rod	12pieces
00 frame	1piece
hanger	1piece
4 m foam holder	4pieces
long cylinder	1piece
clip lock lever	2pieces
bourdon spring	1piece
1220 roller	8pieces
roller axes	16pieces
6004 bearing	16sets
M20 nut	24pieces
cutting under frame	1 piece